Difference 1: Honest Energy Input and Precise FX & FORMA Treatment

InMode treatment has a set maximum output for both FX mode (fat reduction) and FORMA mode (collagen lifting). Therefore, sufficient treatment time and energy use are crucial for satisfactory results.

For FX mode treatments, we adhere to a minimum of 6 minutes, and for FORMA mode treatments, we ensure an energy value of 10K or more.

Instead of using internal timers that may not adhere to precise amounts, we prioritize honest and ethical treatments.

All our treatments are performed directly by medical professionals, striving for stable results and safety.

Difference 2: Know-how for Rapid Temperature Increase to Enhance FX Mode Effectiveness

For FX treatment, the temperature must reach a certain level or higher for fat cells to be effectively broken down and for the mechanism to be more activated.

Our medical team strives to quickly raise and maintain the target temperature while minimizing pain.

During treatment, we meticulously adjust the output, suction pressure, movement speed, treatment sequence, and skin reaction.

- We use the maximum treatment output to supply stronger energy, helping to achieve a rapid temperature increase.

- By applying a longer pulse duration, we extend the high-frequency energy injection time per session. This prolongs the energy delivery time through the tip, which can contribute to a faster temperature rise.

- Along with the InMode device's real-time temperature check function, our medical staff directly checks the temperature of the treated area with the back of their hand during the procedure. This helps us to minimize the patient's pain burden.

- We adjust the tip movement speed for each treatment area. Initially, we ensure heat is evenly distributed across the entire skin, then we concentrate on areas of concern or regions with more fat to raise the temperature. This approach considers both pain reduction and treatment effectiveness simultaneously, allowing for more satisfactory results.

Difference 3: Delicate Design Treatment Considering Cheek Hollows

Since FX treatment targets fat tissue, a meticulous design process before the procedure is crucial.

Improper treatment can lead to phenomena such as cheek hollowing. Therefore, the procedure is performed after thoroughly designing areas for asymmetry improvement or specific concerns with the medical team.

We meticulously analyze each individual's face shape and fat distribution to help achieve more natural and harmonious results.

Difference 4: Transparent Treatment Process Through Verification of Administered Amount After Procedure

After the treatment is completed, we directly show patients that the actual treatment time and energy input have been applied as prescribed. This is our effort to enhance the transparency of the treatment process, providing a more trustworthy experience.

About InMode Treatment

*Radiofrequency (RF) lifting treatment methods are mainly categorized into two types.

1. Monopolar Method

This method involves energy generated from one electrode being recovered through a pad attached to the body.

While energy can be delivered deep into skin tissues, strongly inducing a deep heating effect, patients may experience some irritation during the treatment.

2. Bipolar Method

In this structure, radiofrequency energy circulates between two electrodes, primarily concentrating energy on the skin's surface and in the dermal layer.

It can be performed relatively safely with less pain, but it may be difficult for the energy to reach deeper areas like the fat layer.

*InMode FX, Principle of Acting on the Fat Layer Despite Being Bipolar

As explained earlier, bipolar methods are generally known to have difficulty delivering energy deep into the fat layer.

Nevertheless, InMode FX possesses a unique structure that allows it to effectively target the fat layer despite being a bipolar method.

The core reason for this lies in its vacuum suction function.

This function gently suctions the skin upwards, precisely positioning the skin and subcutaneous fat layer between the two electrodes.

By delivering radiofrequency energy in this precisely positioned state, thermal energy can effectively penetrate even deeper into the fat layer, despite it being a bipolar method.

When treated in this manner, fat cells can be exposed to temperatures of approximately 42~45 degrees Celsius, leading to damage.

Damaged fat cells are naturally expelled from the body via the lymphatic system. Simultaneously, an active promotion of collagen production in the dermal layer can be expected.

Through this, two effects—fat reduction and improved skin elasticity—can be simultaneously anticipated.

*Main Expected Effects of InMode FX Treatment

1. Fat Cell Breakdown Effect

When a constant temperature (42~45 degrees Celsius or higher) is maintained for at least 6 minutes, it can induce damage to the cell membranes of fat cells by thermal energy.

The contents of damaged cells can exit the body and be naturally expelled through lymphatic circulation.

This treatment aims for fat reduction and can be considered for areas with significant fatty tissue, such as facial jowls or a double chin.

2. Collagen Induction Effect

During the process of breaking down fat cells, the thermal energy delivered to the dermis can activate fibroblasts. This can lead to the induction of new collagen production.

In addition, existing collagen fibers show a contraction response, so a certain degree of tightening effect can be expected immediately after the treatment.

*Expected Effects of InMode FORMA

FORMA is a treatment that intensively delivers radiofrequency energy to the dermis, which is a shallower layer than the fat layer of the skin.

During the treatment, when the device is gently pressed against the skin surface and moved, heat of about 42-43 degrees Celsius is delivered to the skin.

This temperature can stimulate fibroblasts, helping to improve fine lines, enlarged pores, and reduced skin elasticity.

FORMA is equipped with a real-time temperature feedback system, demonstrating strength in maintaining a stable temperature during treatment.

This can help induce collagen production at a consistent temperature without subjecting the skin to excessive thermal stimulation.

Immediately after the treatment, you may experience a tightening sensation in the skin, and the collagen regeneration process typically appears over 2 to 6 weeks.

*FX and FORMA: Suitable Treatment Areas?

There can be various causes for sagging or fat accumulation in different areas of the face.

-Double Chin

A double chin often becomes prominent due to excessive accumulation of subcutaneous fat or reduced elasticity of the muscles under the chin.

FX intensively delivers radiofrequency thermal energy to the fat layer in this area, inducing the breakdown of fat cells, and through collagen regeneration, can be expected to improve the elasticity of the skin under the chin.

FORMA can be considered as an auxiliary application alongside FX treatment when the skin is relatively thin or shows prominent loss of elasticity.

-Jowls (Bulldog Cheeks)

This phenomenon is a common part of mid-face aging that occurs as the fat in the cheek area sags due to gravity. FX can help reduce excessive fat volume,

and by enhancing skin elasticity with FORMA, it can contribute to forming a more refined and lifted facial contour.

-Cheeks / Side Cheeks

Enlarged pores, fine line formation, and rough skin texture are changes that primarily occur due to a decrease in collagen density in the dermis.

FORMA stimulates fibroblasts through thermal energy to promote collagen and elastin production, thereby contributing to improvements in skin surface density and texture.

-Jawline

When a previously defined jawline becomes blurry, it's often due to reduced skin elasticity rather than a fat issue. In such cases, FORMA can be used to work intensively on the dermis, inducing collagen contraction and regeneration,

and if necessary, FX treatment can be combined to help further define and refine the facial contour.

-Eye Area, Forehead, Mouth Area

These areas are prone to fine lines and have relatively thin and sensitive skin tissue.

FORMA is a treatment where desired effects can be expected even with low energy output, making it suitable for consideration in these sensitive areas.

*Understanding InMode Treatment

For InMode treatment, simply owning the equipment may not be enough to guarantee sufficient treatment quality.

The core of the treatment lies in combining the right handpieces, determining the depth of thermal energy delivery, appropriately controlling the total accumulated energy, and meticulously planning the treatment according to the individual's skin condition.

For example, in FORMA treatment,

collagen production is unlikely to be actively stimulated with heat that merely provides a warm sensation on the skin.

In fact, a temperature of 42-43 degrees Celsius must be consistently maintained in the dermis for at least 10 minutes,

and an accumulated energy of 8-12 kJ (kilojoules) or more must be delivered per area for fibroblasts to be effectively stimulated and produce collagen.

FX treatment is similar. Rather than a simple radiofrequency delivery method, it requires the combined application of vacuum suction and thermal energy,

and deep heat of 42 degrees Celsius or more must be delivered deep into the skin for at least 6 minutes to expect both fat breakdown and collagen contraction effects simultaneously.

Depending on the characteristics of the treatment area, it is necessary to apply energy of 8-15 kJ or more, and for sensitive areas where the skin is thin or bruises easily, vacuum pressure must be finely adjusted.

Furthermore, managing the fat layer first with FX and then finishing with FORMA for lifting and elasticity improvement is expected to create a greater synergistic effect.

We can control any swelling or heat that may remain after the procedure, while delicately refining your facial lines through the lifting effect.

To summarize,

When considering an InMode procedure, the anatomical knowledge of the medical staff performing the procedure, their ability to adjust device settings, and their skill in personalized design are paramount, more so than the equipment itself.

Our medical team adheres to the principles mentioned above, constantly striving and researching methods to provide our patients with satisfactory lifting results.

Even for the same InMode procedure, we will provide a treatment that is more suitable for each individual, based on the medical team's skilled know-how.

Procedure Guide

Step 1 FX: Utilizing radiofrequency energy and IRE (electrical stimulation) technology together, this step induces an overall lifting effect from the epidermis to the SMAS layer. During this process, it can help reduce unnecessary fat tissue and stimulate collagen production, thereby improving the overall contours of the face.

Step 2 FORMA: By delivering concentrated thermal energy to the dermis, this step can activate collagen production and contribute to improved skin elasticity. Through this, positive effects on the reduction of fine wrinkles can also be expected.

All procedure steps are personally performed by experienced medical staff.