Kkeut Korean Medicine Clinic's Layering Procedure Steps

1. Preparation and Skin Cleansing

Cooling or anesthetic cream will be applied as needed.

Kkeut Korean Medicine Clinic's 4-Step Skin Booster Layering Program

2. 4-Step Skin Booster Layering Procedure (using MTS or Potenza RF)

First Skin Booster Ampoule Application

A thin layer is applied over the entire face to perform the priming step.

This helps induce a skin reaction in the epidermal layer.

Second Skin Booster Ampoule Application

After shallow needling targeting the epidermal layer, the ampoule is applied.

Third Skin Booster Ampoule Application

After needling targeting the basement membrane at the dermal-epidermal junction, the ampoule is applied.

Fourth Skin Booster Ampoule Application

After needling, the ampoule is applied to areas where the patient desires intensive improvement, such as pores or scars.

3. Soothing Care

The procedure concludes with a Jaurungo modeling mask for soothing.

At our clinic, we apply a total of 4 layering techniques in a single procedure to help deliver skin booster ingredients widely and evenly to the skin.

Kkeut Korean Medicine Clinic's skin booster layering program focuses on reducing the burden of bruising, swelling, incorrect drug injection, and hypersensitivity reactions. Individual results may vary.

Kkeut Korean Medicine Clinic's Absorption Technique: Layering Method

The Jevelook formulation has limitations in skin absorption with simple topical application alone. Therefore, our clinic

applies a layering technique that effectively delivers skin booster ingredients using Micro-needle Therapy System (MTS) or radiofrequency microneedling (Potenza RF) devices.

The particle size of Jevelook skin booster is approximately 30-50μm, and absorption can be promoted through MTS or Potenza RF. However, to minimize drug loss and improve effective ingredient delivery, a layering technique is applied during the procedure.

MTS Layering Technique

MTS creates fine channels of approximately 150μm in the skin, creating absorption pathways for effective drugs.

At our clinic, by utilizing MTS through a 4-step layering process, we can expect improved absorption rates.

Priming application to the epidermal layer

Shallow needling followed by ampoule application targeting the epidermal layer

Ampoule application to the dermal-epidermal junction

Ampoule application tailored to areas requiring intensive care, such as pores and scars

After the procedure, soothing care with a Jaurungo modeling mask can help reduce skin burden.

Potenza RF Microneedling Layering Technique

Potenza RF creates fine channels of about 180μm and uses radiofrequency heat to constrict these pathways. This reduces fluid reflux that can occur with conventional needle procedures, helping Jevelook ingredients to be delivered more effectively to the dermal layer.

Compared to manual injection methods, there may be some differences in terms of drug loss. However, it has the advantage of delivering the drug more evenly to the desired dermal layer, reducing pain during the procedure, and promoting uniform absorption.

Similar to MTS, the needle depth can be adjusted, allowing for the application of a 4-step layering technique during the procedure.

At Kkeut Korean Medicine Clinic, we develop a treatment plan by selecting the appropriate method between MTS and Potenza RF, or combining them, according to the patient's skin condition and concerns.

Reasons for Applying This Procedure Method at Kkeut Korean Medicine Clinic

Jevelook is a formulation provided in powder form.

Before the procedure, it requires a stabilization process of thoroughly mixing with saline to create an appropriate viscosity.

If the procedure is performed by manual injection, and drug mixing is insufficient or injection depth is not properly controlled, the drug may clump, leading to the possibility of nodule formation.

Furthermore, if the drug is injected into the subcutaneous fat layer instead of the dermal layer, the expected effects may not appear. Individual results may vary, so it is best to decide after consulting with a specialist.

When performing injection procedures, it is difficult to completely rule out the possibility of side effects such as nodules, no matter how carefully the approach is taken. Therefore, we strive to perform procedures in a manner that is most suitable and stable for each individual, aiming to achieve positive results.

We meticulously manage every step, from the hydration process of the medication and viscosity control to creating pathways within the skin. Our customized layering technique, tailored to each individual's skin condition, ensures that the medication is precisely absorbed into the areas where it is needed.

We believe it is important to enhance the effectiveness of the treatment while minimizing potential risks.

What is Juvelook Skinbooster?

Juvelook is a complex skin booster composed of PDLLA (Poly-D,L-lactic acid) and hyaluronic acid (HA).

It can help improve skin texture, pores, fine lines, and acne scars, and is known to be effective in improving skin elasticity and density by promoting the generation of autologous collagen and elastin in the dermis.

PDLLA is characterized by its small particle size. It is an ingredient developed to be delivered deep into the skin while reducing the risk of inflammatory reactions or nodule formation. Therefore, it can be suitably used for those with sensitive skin.

Juvelook contains the following ingredients:

PDLLA 42.5mg (an ingredient that helps stimulate autologous collagen production)

Non-cross-linked Hyaluronic Acid 7.5mg (an ingredient that provides hydration and improves the skin barrier)

When PDLLA reaches the dermal layer, it activates fibroblasts, helping them produce more collagen and elastin fibers.

Collagen determines the skin's thickness and density, while elastin is a crucial component for maintaining skin elasticity.

Increased production of these two fibers can contribute to fundamentally improving issues such as fine lines, enlarged pores, and decreased elasticity.

Additionally, PDLLA can stimulate stem cells to induce the creation of new fibroblasts.

This can help replace old cellular structures and renew the skin's intrinsic structure.

Fibroblasts, which produce collagen and elastin fibers, may naturally decrease or have difficulty regenerating over time.

Juvelook Skinbooster promotes the generation of new fibroblasts instead of aged ones. This can further activate the long-term production of collagen and elastin fibers.

Recommended for

• 
  
• 
  
• 01. Those concerned about decreased skin elasticity or enlarged pores
• 
  
• 
  
• 
  
• 02. Those bothered by pore issues or acne scars
• 
  
• 
  
• 
  
• 03. Those seeking natural volume improvement without an artificial look
• 
  
• 
  
• 
  
• 04. Those concerned about rough skin texture or noticeable fine lines
• 
  
• 
  
• 
  
• 05. Those who desire collagen regeneration but are hesitant about injection procedures
• 
  
• 
  
• 
  
• 06. Those who wish to naturally improve skin elasticity
• 
  
• 
  

What is the Clinical Basis for Juvelook?

Multiple studies have confirmed that PDLLA has a positive effect on dermal regeneration.

A study by Kwon et al. (Dermatologic Surgery, 2022) reported that when PDLLA skinbooster was administered a total of 3 times at 4-week intervals, it could help increase skin thickness, dermal density, and improve elasticity.

Research by Kim et al. (Journal of Cosmetic Dermatology, 2021) confirmed that PDLLA promotes the production of not only collagen but also elastin.

A paper by Han et al. (Lasers in Surgery and Medicine, 2020) mentioned that when an MTS-based absorption method was used for acne scar patients, the medication could be effectively delivered to the dermal layer, and the incidence of epidermal irritation and side effects could be low.

A Message from Our Head Doctor

Many first-time visitors to our clinic often have deep concerns about their skin texture.

There are those who experience difficulties such as makeup not adhering well due to visibly enlarged pores or rough skin texture.

Although these concerns may not be apparent to others, they can be a significant source of stress for the individual.

In such cases, we recommend considering Juvelook treatment.

This treatment can help refine skin texture, improve pores, and contribute to activating the skin's self-regenerating capabilities.

If you have previously found injection procedures painful or were concerned about medication loss,

experiencing Juvelook Skinbooster treatment through our clinic's layering technique could be an excellent option.

Treatment Benefits

• 
  
• 
  
• 01. The combination of FDA-approved polymeric PLA and hyaluronic acid can help improve various skin concerns.
• 
  
• 
  
• 
  
• 02. By inducing autologous collagen production within the skin, you can expect more natural and healthy skin changes over time.
• 
  
• 
  
• 
  
• Skin elasticity and texture can be improved, and it can also help alleviate fine lines and acne scars.
• 
  
• 
  
• 
  
• This ingredient is naturally biodegradable and absorbable in the body. Therefore, no residues remain in the body after a certain period.
• 
  
•